LG washer OE error code. If you own an LG washer, you may have encountered the OE error code at some point. This error code indicates that there is a problem with the washer’s water drainage system.

Table of Contents

LG washer OE error code

In this article, we’ll outline the potential causes of the OE error code and provide some solutions for fixing it.

Cause 1: Clogged drain hose

One of the most common causes of the OE error code is a clogged drain hose. The drain hose is responsible for carrying the water out of the washer and into the drain.

If the hose is clogged, the water will not be able to flow out of the washer, resulting in the OE error code.

Solution

To fix this problem, you’ll need to locate the drain hose and clear any debris that may be blocking it. Follow these steps:

Locate the drain hose (it is usually located at the back of the washer).
Disconnect the drain hose from the washer.
Use a flashlight to inspect the hose for any debris.
If you see any debris, use a small brush or a pair of needle-nose pliers to remove it.
Reconnect the drain hose to the washer.

Cause 2: Clogged drain pump

Another potential cause of the OE error code is a clogged drain pump. The drain pump is responsible for moving the water out of the washer and into the drain.

If the pump is clogged, the water will not be able to flow out of the washer, resulting in the OE error code.

Solution

To fix this problem, you’ll need to locate the drain pump and clear any debris that may be blocking it. Follow these steps:

Locate the drain pump (it is usually located at the bottom of the washer).
Disconnect the drain pump from the washer.
Use a flashlight to inspect the pump for any debris.
If you see any debris, use a small brush or a pair of needle-nose pliers to remove it.
Reconnect the drain pump to the washer.

Cause 3: Malfunctioning drain pump

In some cases, the OE error code may be caused by a malfunctioning drain pump.

If the pump is not functioning properly, it will not be able to move the water out of the washer, resulting in the OE error code.

Solution

If you suspect that the drain pump is malfunctioning, you’ll need to replace it. To do this, you’ll need to purchase a new drain pump and follow these steps:

Check that the washer is level by using a leveler tool. If the washer is not level, adjust the feet until it is level.
Check that the drain hose is properly connected. The drain hose should be securely connected to both the washer and the drain.Locate the drain pump (it is usually located at the bottom of the washer
Disconnect the drain pump from the washer (be sure to turn off the power and unplug the washer before attempting this).
Remove the old drain pump.
Install the new drain pump.
Reconnect the drain pump to the washer.

It is generally recommended to consult the user manual or a professional appliance repair technician for assistance with replacing the drain pump.

Cause 4: Improper installation

In some cases, the OE error code may be caused by improper installation of the washer. If the washer is not level or the drain hose is not properly connected, it can cause problems with the water drainage system, resulting in the OE error code.

FAQs

Can I fix the OE error code on my own?

In many cases, the OE error code can be fixed on your own by following the steps outlined above. However, if you are unable to fix the problem or if the issue persists, it may be time to consult a professional appliance repair technician.

Is it safe to use my washer with the OE error code?

It is generally not recommended to use your washer with the OE error code. The OE error code indicates that there is a problem with the water drainage system, which can potentially cause damage to the washer or create a safety hazard. It is best to troubleshoot and fix the problem as soon as possible.

How can I prevent the OE error code from happening again in the future?

There are a few steps you can take to prevent the OE error code from happening again in the future:

Regularly clean the filters and run a vinegar wash cycle to prevent debris from clogging the drain hose or pump.
Make sure the washer is level and the drain hose is properly connected.
If you notice any issues with the washer’s water drainage system, address them as soon as possible to prevent further problems.

What should I do if the OE error code persists after trying the above solutions?

If the OE error code persists after trying the above solutions, it may be time to consult a professional appliance repair technician.

A professional will be able to diagnose the problem and provide the necessary repairs to get your washer back to working effectively.

Conclusion

In conclusion, the OE error code on an LG washer can be caused by a variety of issues, including a clogged drain hose, a clogged drain pump, a malfunctioning drain pump, or improper installation. By following the steps outlined above, you can troubleshoot and fix the problem, getting your washer back to working properly. If you are unable to fix the problem on your own or if the issue persists, it may be time to consult a professional appliance repair technician.

Related Guides

LG washer OE error code