LG front load washer overflowing. Laundry is a tedious chore, but an overflow of your washing machine can be one of the worst things to happen in your home.
Homeowners and renters know there’s nothing worse than a flood in your house that has left a room filled with water and other materials.
A flooded room is a huge mess to clean up, especially if it goes untreated over time. An unchecked flooding situation could potentially lead to mold or mildew growth which will cost you money because it requires you to spend more money on tools and supplies.
If your washing machine overflows, there are several techniques you can use in order to minimize the damage caused by the flood while making sure nothing poisonous comes into contact with what was just washed.
Table of Contents
LG Front Load Washer Overflowing
We will discuss here the reasons of overflowing the washer.
Faulty Water Inlet Valve
If your LG washing machine is overflowing, you may have a defective water inlet valve.
The water inlet valve is the one that controls the inflow of water into the machine and like all valves, it should be able to shut off and on again as required.
When this isn’t happening, the result can entail overflows or what we often call flooding as most people cannot see the overflow and think that all of the water is safely contained with their appliance when in reality it’s not.
The pressure switch located in the water inlet valve will prevent water from entering the washer tub when there is a high water level.
If the pressure switch becomes defective, it will not allow water to enter at all. This could possibly cause the washer to over flow if it isn’t equipped with another shut off device like another pressure switch, or if no other safety features are included on your appliance.
Check that the air tube leading into the new pressure switch is clear of debris and is not leaking until you install the new part, otherwise any excess moisture can get trapped inside and cause corrosion.
House Supply Water Pressure Is Low
Make sure the water pressure isn’t too weak because this might lead to leaks. If you notice that there is a leak somewhere, check if the washing machine has been provided with enough pressure to prevent cracks or breaks in the pipes.
Of course, make sure that the maintenance of your washing machine was properly carried out! You can perform this test by checking the power outlet’s pressure and comparing it with efficiency of a garden hose attached to a spigot.
Why is the water in my washing machine overflowing?
If your washing machine has overflowed, that could mean that you’re overloading it with too much laundry so here are a few tips for managing your machine and keeping it from overflowing again in the future.
Try running one full load with a small load of clothes and then observe the process to check for problems.
If the problem persists, you may need to limit the amount of washing machine capacity that you use or reduce the amount of clothes you wash at once.
How much does it cost to replace the water inlet valve on a washing machine?
The cost for replacing a washing machine inlet valve is $95 to $190. This small part connects the hoses necessary for the unit to fill with water.
Your inlet valve may need replacing if you notice it seems faulty. It could be not connecting properly, or perhaps giving out when the apparatus attempts to pull in water.
Overflowing washers are no fun! The best way to avoid having a flood in your house is to be proactive and try to fix the problem before it gets too far. Most of the time, if you’re careful, you can save your washer and prevent the damage from spreading.
Most of the time, a clog happens because a sock or other item has gotten lodged in the drain. The second you notice that the washer is being noisy, stop it! If you’re patient, you can get to the bottom of the problem and save your washer.