| | |

Frigidaire affinity washer door boot seal replacement

Frigidaire affinity washer door boot seal replacement. Frigidaire affinity washers are one of the most used appliances nowadays.

If due, for any reason, your Frigidaire Affinity washer is not working properly and is leaking from the door, then there must be an issue in the door seal of this Frigidaire affinity washer or some other problem in it.

In this situation, you don’t need to get panic as it can be easily solved on your own without taking any professional help.

After reading this article, you will be able to know about the ways that can help you to get rid of the problems associated with the Frigidaire affinity washer.

Frigidaire affinity washer door boot seal replacement

Frigidaire affinity washer door boot seal replacement 2022 guide

The following are the steps you need to follow to prevent your Frigidaire Affinity washer from leaking; in this way, you can easily replace the boot seal of the washer.

Step 1: Unplug the washer

The first step while replacing the seal of the Frigidaire affinity washer is to unplug the washer. As it is an electrical appliance that works with electricity, the first thing is to unplug it.

And doing work while electricity is on can be dangerous to you. Flip the circuit breaker to the washer and unplug it from all the power supplies. Make sure that the washer is unplugged properly.

Step 2: Remove the door

The next step is to remove the door of the Frigidaire affinity washer. Then remove the clamps. To do this process, you need the help of a screwdriver.

Using a screwdriver will perform your work in very less time. Make sure to remove the clamp that runs down the door seal. In this way, you can access the door of the washer.

Step 3: Remove the Door Panel

After removing the clamp:

  1. Disconnect the wire connector from the gasket or the door seal.
  2. Push the tab while removing the wire connector and remove the door panel.
  3. Remove the screws from the top and bottom of the door panel.
  4. Ensure that you don’t damage the door panel part while removing it.

Step 4: Remove the door hinge

The next step is to remove the control panel and the front panel of the washer. Do this process carefully and cautiously remove the control panel to access the inside of the machine. Along with this, also remove the door hinge.

Step 5: Remove the damaged door boot seal

Now, detach the old and damaged boot seal from the washer, causing the Frigidaire affinity washer to leak. Very cautiously and carefully remove the damaged seal so you can place a new door with no leakage problem.

Step 6: Install the new door boot seal

Finally, install the new door boot seal in the washer. This is the step in which you must install the new door boot seal, which has no leakage problems.

Step 7: Reassemble the washer

Reassemble the washing machine

Reassemble the appliance and put the clamps back. Also, reconnect the door latch wiring. Put the clamps tightly and ensure no clamps are loose because most of the time, loose clamps can also result in the leaking of the Frigidaire affinity washer.

In this way, you can easily replace your Frigidaire Affinity washer. After reading this article, you will know all the steps to fix the door boot seal of your Frigidaire Affinity washer leaking from the door.

FAQs

Can I replace the door boot seal of my Frigidaire affinity washer myself?

Yes, you can easily remove the damaged boot seal of your Frigidaire Affinity washer. Now, you can also replace the door seal of the Frigidaire affinity washer all by yourself.

By following these steps mentioned above, you can easily perform this work. Following the above-mentioned steps, one can fix their Frigidaire affinity washer without help from any professional.

Why is my Frigidaire affinity washer leaking from the door?

There can be many reasons why the Frigidaire affinity washer door is leaking. Sometimes, due to loose clamps, the washer starts to leak.

Most of the time, it is also due to the damaged door boot seal. This seal can cause the dishwasher to leak.

Conclusion

The Frigidaire Affinity washer is the basic need of today and has the maximum benefits. It helps to perform your work in a very less time. It is very beneficial and used by every household.

Similar Posts