Dishwasher wont drain no air gap
Dishwasher wont drain no air gap. If your dishwasher won’t drain, it can be a frustrating and inconvenient issue to deal with.
A dishwasher that doesn’t drain properly can leave your dishes dirty and unclean, and it can also lead to foul odors and the buildup of mold and mildew.
Dishwasher wont drain no air gap
In this article, we’ll discuss the potential causes of a dishwasher that won’t drain due to a lack of an air gap, and provide a step-by-step guide to help you troubleshoot and solve the problem.
Cause 1: The air gap is clogged
One potential cause of a dishwasher that won’t drain due to a lack of an air gap is a clogged air gap.
The air gap is a small device that is installed on the top of the sink or counter and is designed to prevent dirty water from being siphoned back into the dishwasher. If the air gap is clogged, it can prevent the dishwasher from draining properly.
To troubleshoot a clogged air gap, follow these steps:
- Locate the air gap. The air gap is typically located on the top of the sink or counter, near the dishwasher.
- Remove the cap from the air gap. The cap is typically held in place with a screw or a clip.
- Inspect the air gap for any debris or blockages. Use a flashlight to check inside the air gap for any debris or blockages that may be preventing the dishwasher from draining properly.
- Clean the air gap. If you find any debris or blockages, use a small brush or a toothpick to gently remove them.
- Replace the cap on the air gap and test the dishwasher. Once you’ve cleaned the air gap, replace the cap and run a test load to see if the dishwasher is now able to drain properly.
Cause 2: The dishwasher drain hose is clogged
Another potential cause of a dishwasher that won’t drain due to a lack of an air gap is a clogged dishwasher drain hose.
The drain hose is responsible for carrying dirty water from the dishwasher to the drain. If the drain hose is clogged, it can prevent the dishwasher from draining properly.
To troubleshoot a clogged dishwasher drain hose, follow these steps:
- Locate the dishwasher drain hose. The drain hose is typically located underneath the dishwasher, near the back.
- Disconnect the drain hose from the dishwasher. The drain hose is typically secured with a clamp or a hose clamp.
- Inspect the drain hose for any debris or blockages. Use a flashlight to check inside the drain hose for any debris or blockages that may be preventing the dishwasher from draining properly.
- Clean the drain hose. If you find any debris or blockages, use a small brush or a toothpick to gently remove them.
- Reconnect the drain hose to the dishwasher and test the dishwasher. Once you’ve cleaned the drain hose, reconnect it to the dishwasher and run a test load to see if the dishwasher is now able to drain properly.
Cause 3: The dishwasher drain line is clogged
Another potential cause of a dishwasher that won’t drain due to a lack of an air gap is a clogged dishwasher drain line.
The drain line is responsible for carrying dirty water from the dishwasher to the drain. If the drain line is clogged, it can prevent the dishwasher from draining properly.
To troubleshoot a clogged dishwasher drain line, follow these steps:
- Locate the dishwasher drain line. The drain line is typically located underneath the sink, near the back.
- Disconnect the drain line from the dishwasher. The drain line is typically secured with a clamp or a hose clamp.
- Inspect the drain line for any debris or blockages. Use a flashlight to check inside the drain line for any debris or blockages that may be preventing the dishwasher from draining properly.
- Clean the drain line. If you find any debris or blockages, use a small brush or a toothpick to gently remove them.
- Reconnect the drain line to the dishwasher and test the dishwasher. Once you’ve cleaned the drain line, reconnect it to the dishwasher and run a test load to see if the dishwasher is now able to drain properly.
Cause 4: The dishwasher pump is damaged
If the dishwasher won’t drain due to a lack of an air gap and you’ve checked the air gap, the drain hose, and the drain line, the issue may be with the dishwasher pump.
The pump is responsible for moving dirty water from the dishwasher to the drain. If the pump is damaged, it can prevent the dishwasher from draining properly.
To troubleshoot a damaged dishwasher pump, follow these steps:
- Locate the dishwasher pump. The pump is typically located underneath the dishwasher, near the back.
- Disconnect the pump from the dishwasher. The pump is typically secured with screws or clips.
- Inspect the pump for any visible signs of damage. Look for cracks, bends, or other issues that may be preventing the pump from functioning properly.
- Test the pump. If you suspect that the pump is damaged, you can use a multimeter to test it. Consult the user manual for your dishwasher and follow the instructions for testing the pump.
- Replace the pump if necessary. If the pump is damaged, you’ll need to replace it. To do this, follow the instructions in the user manual for your dishwasher and use a screwdriver to remove the old pump and install the new one.
Conclusion
If your dishwasher won’t drain due to a lack of an air gap, there are several potential causes to consider. By following the steps outlined in this article, you can troubleshoot and solve the problem yourself, restoring the performance of your dishwasher and ensuring that your dishes are clean and properly washed.
Whether you’re dealing with a clogged air gap, a clogged drain hose, a clogged drain line, or a damaged pump, with some basic appliance repair skills and the right tools and supplies, you can handle this task yourself.
If you’re not comfortable handling the task yourself, it’s always a good idea to consult a professional. By taking the time to diagnose and address dishwasher drain issues, you can save money on energy bills, reduce water waste, and enjoy the convenience of a properly functioning dishwasher.
Related Guides
