We all know that the shower is a great way to start your day. And when you get in, it feels like you are standing under a waterfall! But there’s one thing about showers that many of us don’t think about- water pressure. For some people, their shower have too much water pressure, which can be very irritating because they may not enjoy spending time in the shower. This blog post will help explain what causes high water pressure and how to reduce it if necessary.
Often, high water pressure happens because there is something wrong with your pipes or plumbing system, which means you should contact a plumber as soon as possible for help with getting this fixed. So, before you go around blaming your landlord or neighbor, you should check out the plumbing system in your home.
Standard Water Pressure – PSI
American Standard recommends a maximum water pressure of 80 to 100 PSI (pounds per square inch). Anything over that amount of force could be considered excessively high. The higher the water pressure in your home is above your standard showerhead’s recommended PSI rating, the more likely it is that you will experience issues with faucet performance or fixture damage.
If your water pressure is this high, you should contact a plumber to have them come out and investigate the problem for you. If the water pressure in your home is over 100 PSI, we recommend that you hire a professional to estimate whether or not it will be cheaper to put in an entirely new system than do repairs.
How High Pressure in Shower Affects Retrieving Water
If too much pressure builds up in a pipe system, all the water will run at once when someone starts using the tap because there is no way to control the flow. This can lead to several problems, such as flooding in your home or even rupturing pipes in older systems.
When you have high pressure in a showerhead, water doesn’t come out in a steady stream but rather in a series of bursts and sputters. There is also little power behind each shot when using this water flow, making it challenging to clean hair from the drain. If you have low pressure coming from your showerhead, there is not enough force for water to reach areas that are harder to access, such as the top sections of your body.
Good Shower Pressure: Why It’s Important and How It’s Achieved
Good shower pressure means having an adequate amount of water pressure behind each stream of water. This allows you to quickly rinse away soap and shampoo from your hair and skin, as well as clean your shower drain without too much effort. If you have low pressure, it can be difficult to reach certain places for cleaning purposes or even wash shampoo out of your hair because the force is so weak behind the stream of water.
Showers with higher water pressure also come with a more significant number of nozzles. These multi-level jets provide a wider area for cleaning and stimulate muscle tissues and offer enhanced relaxation benefits due to their deep penetration and powerful bursts. You can adjust how high or low these jets are depending on which nozzle you use, allowing you to easily target specific body parts and find the perfect water flow for each section.
What is High Water Pressure in Shower and Why Does it Happen?
A high-pressure shower means you may need to turn down your water pressure not to hurt when you stand underneath the spray. There are a few causes of this problem, such as:
Your pipes may be loose or not attached well enough. You can tighten these with tools such as wrenches at your sink and toilet areas.
Old pipes might be rusting inside their walls and breaking apart, making them less able to handle the pressure of running water. With old piping, you’ll often see noticeable leaks and drips, too, because they can break apart under pressure.
If you have a clogged drain line, it may be because hair and other gunk have built up over time. This can block the path of water through your system and force it to go somewhere else instead. If you find a clog in your shower drain, try using a hair removal product or enzymes that break down organic buildups. You can also remove hair from the bottom section of your drain with a long tool such as a crochet hook.
Sometimes your faucets could be installed incorrectly by someone who does not know how to connect two lines correctly. That means they might not balance out the pressures inside each pipe, so there is extra on one end and not enough on the other. If you look below your faucets and notice that they are not symmetrical, then try calling a plumber to fix the problem.
No Pressure Restrictors
Every area in your home should have built-in pressure restrictors inside its plumbing system if it is after the 1980s. These valves naturally reduce the water pressure when lines get too full of pressure so they can handle everything without bursting. If you don’t see these in any areas of your home or notice something wrong with them, call a plumber and ask for their help with replacing the devices ASAP.
How do I Fix High Water Pressure in the Shower?
There aren’t many ways to adjust water pressure in your shower unless you have access to a valve to lower or raise the overall water flow.
Fix Loose Pipes
If you have loose pipes, tighten them up, so they are secure within their fittings. You’ll typically need tools such as wrenches for this job.
Replace Old Pipes
If your pipes are rusting or falling apart inside their walls, then call a plumber to see if there’s any way to replace them instead of repairing them. This is usually cheaper than redoing an entire plumbing system.
Clear Out Clogs
Try removing clogs from your drain either by using a tool like a crochet hook or enzyme product designed for breaking down organic material build-up. You may also want to cut back on hair washing and other gunk that gets washed down your drain daily.
If your faucets look uneven, then it could be because they’re installed incorrectly. Try calling a plumber if you think this issue is the cause of high-water pressure.
Change Pressure Restrictors
If you don’t see any pressure restrictors in your bathroom or notice that they are broken, then call a plumber. You can fix this problem by finding new valves or asking them to do it for you, whichever option is cheaper.
Conclusion – Shower have too much Water Pressure
A high-pressure shower can be a problem, and it is wise to try and lower the overall amount of water coming from your system. It would be best if you tracked down root causes for this situation to fix it yourself before calling the plumber that will cost you money.
Thank You For Reading. Have a nice day!
Related Posts: Best AV Receiver Under $1000