Kitchenaid refrigerator water dispenser not working
Kitchenaid refrigerator water dispenser not working. Eating clean is essential for your body; likewise, drinking pure water is crucial for your body maintenance.
In most regions of the world, there is still no water, and in those regions, people have access to water that isn’t clean enough and contains so many harsh chemicals, which can lead to major disorders.
Hence, it is necessary to own a water dispenser in your home for your health.
Kitchen aid is a very renowned brand when it comes to home appliances. Their water dispensers are reliable and stylish, adding luxury to our homes.
A water dispenser saves time and energy as you don’t have to wait for your bottle to get cold, and if you need hot water, you can’t keep standing in the kitchen waiting for your water on the stove to get hot enough.
Water dispensers give you instant clean water whether you want hot or cold. Above all, drinking water from a water dispenser benefits your whole family’s health as it is purified and easy to maintain; change your water bottle whenever needed and clean it once a month.
Kitchen aid water dispensers not only provide you with clean and purified water infect; with this advantage, they are also cost-effective; you don’t have to spend too much on this appliance from the kitchen aid.
Their products are cost-effective and very reliable also; they come with a safety latch, so you don’t have to worry about your child’s safety wondering if he/she might get burned in pursuing to get hot water.
Kitchenaid refrigerator water dispenser not working
Kitchen aid water dispensers are easy to use. However, if it stops working, there can be various reasons.
This article will guide you on why your Kitchen aid water dispenser isn’t working and how you can deal with this issue.
Defective Water Inlet Valve
A water inlet valve is essential for your water dispenser as it provides a water supply to the dispenser, and if it is faulty or damaged, that can be the reason for your kitchen aid water dispenser not working.
Another reason can be that theirs is not enough water pressure. Make sure theirs is 20 psi water pressure reaching the valve. The inadequate or lower water pressure to the valve can be the reason.
You can test the continuity of the water pressure by using a multimeter; if there is not enough continuity, you need to replace the water inlet valve.
Control Board Has Issue
Control Board is like the brain of the water dispenser; if it is not working properly, that means the whole water dispenser won’t work as it control almost all the functions of the water dispenser.
Before checking the control board, if your kitchen aid dispenser isn’t working, test every component of the dispenser separately, and if the whole dispenser doesn’t work, then the fault is with the control board. Get it replaced.
Dispenser Switch
Voltage is required for every appliance to start, and if your kitchen aid water dispenser is not working, the dispenser switch is probably not providing enough or required voltage.
Your dispenser switch can become faulty, and you can determine this with the help of the multimeter; if that is not showing the proper continuity, then you need to replace the dispenser switch as this is the reason for your water dispenser not working out.
Frozen Water Tube
There is a water tube at the bottom of the dispenser door. It can get frozen if the temperature of the dispenser is not enough and the freezer is too cold.
Make sure the temperature is between 0 to 10 degrees Fahrenheit. You can check the water tube located at the bottom of the door by blowing the air through it; if air does not pass out, that predicts that the tube is broken. What you can do is disconnect the water tube and defrost it.
Clogged Water Filter
Clear flow is important for every path, and if the water filter of your dispenser isn’t clear, the water won’t flow towards the clear, which indicates that your water filter is clogged or blocked, which is why your water dispenser is not working.
You should change your water filter every six months to remain clean and work for a longer period. To maintain the proper water flow, it is essential to check your water filter and keep it clean.
Here are the steps to clean a clogged water filter in a KitchenAid refrigerator water dispenser:
- Turn off the water supply to the refrigerator by shutting off the valve on the water line.
- Locate the water filter housing, which is typically located in the upper right-hand corner of the refrigerator compartment.
- Open the filter housing by pressing the release button or turning the filter counterclockwise, depending on your model.
- Remove the filter from the housing and inspect it for signs of clogging, such as discoloration or debris buildup.
- If the filter appears clogged, rinse it under running water to remove any dirt or debris. Be sure to rinse it thoroughly and gently to avoid damaging the filter.
- If the filter is severely clogged or damaged, replace it with a new one. Check the manufacturer’s instructions for the correct type and model of filter to use.
- Once the filter is clean or replaced, reinsert it into the housing and close the filter housing by turning it clockwise or pressing the release button.
- Turn the water supply back on and check the water dispenser for proper flow. It may take a few minutes for the water to flow freely if air has entered the system.
- Test the water for taste and clarity, and discard the first few cups of water to flush out any residual contaminants.
Door Switch
The door switch is a mechanical sensor for the water dispenser that turns off the ice and water dispenser. If the door switch is defective, the water dispenser won’t turn or will not function.
You need to check the door switch if your dispenser is not working; you can do this with the help of a multimeter by checking the continuity of the door switch if it is not adequate. Get it replaced with the new one.
Stubby Water Influence
The reason for your water dispenser not working could be low water pressure from your home supply. So, check the water valve pressure mentioned above; it should be 20 psi at least.
If it is lower than this, your water dispenser is not getting enough pressure, which is why it is not working.
Bottom Line
A non-functioning water dispenser in your KitchenAid refrigerator can be frustrating, but it’s not necessarily a cause for panic. There are several possible reasons why the dispenser may have stopped working, including issues with the water filter, water line, or inlet valve. By following the troubleshooting tips outlined in this guide, you may be able to identify and fix the problem yourself, without the need for costly repairs or professional assistance. With a little bit of patience and attention to detail, you can get your KitchenAid refrigerator water dispenser up and running again, and enjoy the convenience of fresh, filtered water in your home.
