How to replace a gas oven ignitor
How to replace a gas oven ignitor. The igniter in your oven is responsible for starting the fire that allows your oven to work.
If it stops working, then you’ll be out of luck the next time you go to make a meal. Fortunately, it’s not too difficult to replace an oven igniter.
You’ll just need to pick up the right replacement part from your local appliance store or parts supplier.
Once you have the new igniter, follow the steps in this guide to get your oven up and running again.
How To Replace A Gas Oven Ignitor
We will discuss here how we can replace the ignitor of gas oven.
Use the Ignitor
Always make sure the power is off before beginning any work on the oven. To access the ignitor, start by opening the oven door and removing the racks.
Then, locate the two screws at the rear of the oven plate that are holding on the base cover. Remove these screws and pull out the oven plate so that you can see the ignitor.
Remove the Previous Ignitor
In order to install your new oven ignitor, you will first need to locate the old one and take note of how it is installed.
Unplug the two wires connected to the ignitor, and if they are held in place with wire nuts, untwist those as well.
Remove the two screws holding the ignitor in place and pull it out of the oven. To install the new ignitor, simply reverse these steps.
Install the new Ignitor
The new ignitor needs to go in the same spot as the old one did. Be very careful when handling it because it’s fragile and if it chips or cracks, then it’s unusable.
Secure the ignitor with 2 screws and then plug the wires or harness into it. If there are wire nuts, then use new ceramic wire nuts to connect the wires.
Reinstall the Oven
After you have removed the old cover plate from the bottom of the oven, install the new one and secure it with two screws at the rear.
Next, install the oven racks. Upon completion of these steps, your oven should be operational.
Test the Oven
Before beginning to bake, make sure that the oven is properly plugged in and receiving power. Set the oven to the desired temperature to ensure that it ignites immediately and warms up at a normal rate.
FAQs
What is the cost of replacing the igniter in a gas oven?
If your stovetop won’t stop clicking, the pilot light goes out, or your burner won’t light, you might need to replace your gas stove igniter. The cost to replace an igniter typically falls between $150 and $300.
Is it worthwhile to repair a gas oven?
Repairing an oven is always an option–that is, until the repairs cost more money than the oven is actually worth.
If your oven seems to be constantly breaking down, it might be reaching a point where it’s time to just get a new one.
Continually replacing parts and paying for repairs can start to add up pretty quickly, so sometimes buying a new oven just makes more financial sense in the end.
Conclusion
If you’re stuck in a situation where your oven isn’t working and you don’t know how to fix it, remember that the igniter is the part that allows your oven to work in the first place. Make sure you’ve replaced the igniter before continuing to use your oven. If that doesn’t work, then you may need to contact a repair technician, but this is the least expensive and easiest way to get your oven back in working order!
Related Guides
